Параметры
Анализатор спектра
Frequency
Frequency Range: 100 kHz to 1.6 GHz, (6 GHz with Option 6)
Tuning Resolution: 1 Hz
Frequency Reference Aging: ± 1.0 ppm/year
Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging (< ± 50 ppb + aging with GPS on)
Frequency Span: 10 Hz to 1.6 GHz including zero span (10 Hz to 6 GHz with Option 6)
Sweep Time: 100 ms, 10 μs to 600 seconds in zero span
Sweep Time Accuracy: ± 2% in zero span
Bandwidth
Resolution Bandwidth (RBW): 10 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth)
Video Bandwidth (VBW): 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable)
RBW with Quasi-Peak Detection: 200 Hz, 9 KHz, 120 kHz (–6 dB bandwidth)
VBW with Quasi-Peak Detection: VBW with Quasi-Peak Detection
Spectral Purity
SSB Phase Noise @ 1 GHz:
–100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset
–105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset
–115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range: > 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range: DANL to +26 dBm
Maximum Continuous Input: +33 dBm
Display Range: 1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range: –120 dBm to +30 dBm
Attenuator Resolution: 0 to 55 dB, 5.0 dB steps
Amplitude Units: Log Scale Modes: dBm, dBV, dBmv, dBµV; Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW
Amplitude Accuracy (single sine wave input < Ref level, and > DANL, auto attenuation)
–10 °C to 50 °C after 30 minute warm-up: Typical: ± 0.5 dB, 100 kHz to 6 GHz; Maximum: ± 1.3 dB, 100 kHz to 6 GHz
Spurs
Residual Spurious: < –90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious: < –75 dBc (0 dB attenuation, –30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz)
Exceptions, typical:
<–70 dBc @ <2.5 GHz, with 2072.5 MHz Input
<–68 dBc @ F1-280 MHz with F1 Input
<–70 dBc @ F1 + 190.5 MHz with F1 Input
<–52 dBc @ 7349-2F2 MHz, with F2 Input, where F2 < 2424.5 MHz
<–55 dBc @ 190.5 ± F1/2 MHz, F1 <1 GHz
Third-Order Intercept (TOI) Preamp Off (–20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz: +16 dBm
2400 MHz: +20 dBm
200-2200 MHz: +25 dBm, typical
> 2.2 GHz to 5.0 GHz: +28 dBm, typical
> 5.0 GHz to 6.0 GHz: +33 dBm, typical
Second Harmonic Distortion Preamp Off, 0 dB input attenuation, –30 dBm input
50 MHz: –56 dBc
> 50 MHz to 200 MHz: –60 dBc, typical
> 200 MHz to 3000 MHz: –70 dBc, typical
VSWR 2:1, typical
Векторный анализатор цепей
Definitions
All specifications and characteristics apply under the following conditions, unless otherwise stated:
After 15 minutes of warm-up time, where the instrument is left in the ON state.
Temperature range is 23 °C ± 5 °C.
All specifications apply when using internal reference.
All specifications subject to change without notice. Please visit www.anritsu.com for most current datasheet.
Typical performance is the measured performance of an average unit.
Recommended calibration cycle is 12 months.
Frequency
Frequency Range: 500 kHz to 1.6 GHz (500 kHz to 6.0 GHz with Option 16)
Frequency Accuracy: 2.5 ppm
Frequency Resolution: 1 Hz
Код ТН ВЭД
9030400000
Пошлина, %
3,3
